TestortagorElectrical test & tag 0492 936 108 Free quote
  1. Home
  2. FAQ

FAQ

Test and tag questions

Straight answers on intervals, the rules in WA, pricing and what happens on the day.

General

The basics

Can't see your question? Call 0492 936 108.

What is test and tag?

Test and tag is the inspection and electrical testing of plug-in equipment to AS/NZS 3760:2022. Each item gets a visual check, an electrical test on the tester, and a tag showing when it was tested, when it is due again and whether it passed.

Is test and tag a legal requirement in WA?

WA's Work Health and Safety (General) Regulations 2022 require plug-in electrical equipment used in hostile environments, such as construction sites, workshops and anywhere gear is exposed to damage, moisture or heat, to be regularly inspected and tested by a competent person. For lower-risk workplaces, testing to AS/NZS 3760 is the standard way to show you are managing electrical risk, and it is what most insurers, landlords and head contractors ask for.

How often does my equipment need testing?

It depends on the environment. As a guide from AS/NZS 3760:2022: construction sites every 3 months, workshops and factories every 6 months, items that are moved or flexed every 12 months, and fixed equipment that is not open to damage up to every 5 years. Use the retest finder on our home page, or ask us and we will confirm it for your site.

How much does test and tag cost?

It is priced per job, based on roughly how many items you have and where you are. Tell us the item count and suburb through the enquiry form or a quick call, and we will come back with a free quote.

How long will it take?

That comes down to the number of items and how spread out they are. A small office can be done in a short visit; a school or a builder's full fleet takes longer. Give us an idea of the item count and we will tell you what to expect.

What happens if something fails?

It is tagged out of service so it cannot be used, and we show you what failed and why. Repairing or replacing it is up to you. If the problem is in your fixed wiring or switchboard, we will point you to a licensed electrician.

What records do I get?

Every item that passes gets a printed barcode tag from our Seaward Test n Tag printer showing the test date, retest date and status. Results are logged on our Seaward PrimeTest Elite tester, so there is a record of every item tested if you need it for an audit, a landlord or a head contractor.

Can you work early or out of hours?

Yes. Early starts suit trades and building sites, and we can plan visits for quiet periods, school holidays or after hours so your work is not interrupted.

Do I need to unplug everything before you arrive?

No. We unplug each item as we test it and plug it straight back in. The only thing to plan for is computers and servers, so we will agree a time for those with you.

Which areas do you cover?

We are based in Dawesville and cover the coast from Mandurah up to Fremantle, including Halls Head, Falcon, Singleton, Herron, Lake Clifton and the suburbs in between. If you are just outside that, ask anyway.

By service

Specifics

Questions that come up for particular kinds of sites.

Do you test items that are brand new?

New equipment does not need an initial test under AS/NZS 3760, but it does need to be checked and tagged or recorded as new so it lands in your register with the right retest date. We can tag new gear while we are on site.

What happens to items that fail?

They are tagged out of service and set aside, and we show you what failed. Whether you repair or replace them is your call. We do not sell equipment, so there is no upsell.

How often should RCDs be tested?

Push-button tests are a quick user check and are done far more often, before each use on construction sites. Timed trip tests follow the intervals in AS/NZS 3760 and, on building sites, AS/NZS 3012. Tell us your site type and we will confirm what applies.

Can you replace a faulty RCD?

No. We test and report. Replacing a fixed RCD is licensed electrical work, so we will tell you exactly which circuit failed and you can pass that straight to your electrician.

Can you test at our yard instead of on site?

Yes. A lot of builders and trades get everything brought back to the yard or depot on one day so the whole fleet is done at once. Either works for us.

Do subcontractors need their own gear tested?

Every lead and tool on a construction site needs to be in test, no matter who owns it. Subbies can book us directly, or a builder can book one visit for everyone.

How often do office items need testing?

Under AS/NZS 3760:2022, equipment that is moved around or has its cord flexed in normal use is usually tested every 12 months. Equipment that sits in one place and is not open to damage can go up to 5 years. Kitchen appliances and leads normally fall in the 12-month group.

Will you need to turn our computers off?

Briefly, yes, because the item has to be unplugged to test it. We will arrange a time with you so staff can save their work first.

Can you work during school holidays?

Yes, and it is the easiest time to get through a whole school. Book early, because holiday slots are the ones everyone wants.

Do you test childcare centres too?

Yes. Childcare centres, community halls and sporting clubs all have the same kind of mixed equipment and we test them the same way.

Do you test welders?

Plug-in single-phase welders can be tested like any other appliance. Hard-wired and three-phase machines are a job for a licensed electrician, and we will tell you which is which.

Why six months for a workshop?

Because tools in a workshop are flexed, knocked and exposed to oil and dust far more than office gear. AS/NZS 3760:2022 sets six months for factories, workshops and places of manufacture, maintenance or fabrication.

Due for a retest?